ARCADE1UP 82058280 X-Men vs. Street Fighter Instruction Manual

CAPCOM
ALTER 14+

WARNING
To ensure the safe operation of the product, be sure to read this user manual before use.
Keep this manual in a safe place for easy reference when needed.

This device contains license-exempt transceivers that comply with Innovation, Science and Economic Development Canada license-exempt RSS(s). The transaction is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation of the device.

"FCC and ISED RF Radiation Exposure Statement Caution: To ensure compliance with FCC and ISED RF exposure guidelines, position the product's antenna and radio module at least 20 cm from nearby persons."

WARNING
The maintenance instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any maintenance other than that specified in the instruction manual unless you are qualified to do so.

WARNING
READ BEFORE USING Arcade1UP

contents disguise

1 SAFETY INSTRUCTIONS

2 IMPORTANT SAFETY INSTRUCTIONS

3 INSTALLATION

4 SPECIFICATIONS

5 SUPPORT OR SERVICE

6 GAME CONTROLS

7WARNUNG

8 TROUBLESHOOTING

9 COLLECT ALL

10 Documents / Resources

10.1 References

11 Related Posts

SAFETY PRECAUTIONS

The following symbols are used on game labels to draw attention to potentially dangerous situations:
WARNING:If the danger is not avoided, death or serious injury can result.
danger of electric shock. Disconnect the power supply before removing the cover.
It must only be carried out by a qualified technician.
WARNING:To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Please read and understand all warnings in this manual.
Do not let the arcade unit get wet while cleaning.
Parents and Guardians: Please read the entire manual before allowing players to play.
The AC/DC adapter and device shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the device.
The AC/DC adapter serves as a disconnect device.
The device's AC/DC adapter must not be blocked OR easily accessible during intended use. To completely cut off the electrical supply, the device's AC/DC adapter must be disconnected from the mains.
If the device is equipped with a protective earth terminal, it must be connected to a mains outlet with a protective earth connection.
Minimum clearances of 10 cm / 3.94 inches around the device for proper ventilation.
Ventilation must not be impeded by covering the ventilation openings with objects such as newspapers, tablecloths, curtains, etc.
No open flame sources such as B. lit candles are placed.
The device should only be used in temperate climates.

EPILEPSY NOTICE
A very small percentage of people may experience epileptic seizures or blackouts when exposed to certain light patterns or flashing lights. Exposure to certain patterns or backgrounds on a television screen or while playing video games can trigger epileptic seizures or blackouts in these individuals. To reduce the risk of such a seizure, it is recommended to take a break of 10-15 minutes after every hour of play.

FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this device not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or reposition the receiving antenna.
Increase the distance between the device and the receiver
Consult the dealer or an experienced radio/TV technician for help.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

WARNING:Arcade1UP assumes no responsibility for improper installation or excessive stress on screws or brackets.
This wall anchor is not a substitute for proper adult supervision.

IMPORTANT SAFETY INSTRUCTIONS

Read this guide.
Save these instructions.
Heed all warnings.
Follow all instructions.
Do not use this device near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install according to the manufacturer's instructions.
Do not install the device near heat sources such as radiators, heat registers, stoves or other devices (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two prongs and a third grounding prong. The wide blade or third prong is for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Use only fixtures/accessories specified by the manufacturer.
Unplug this device during lightning storms or when unused for long periods of time.
Leave all maintenance work to qualified service personnel. Maintenance is required when the device has been damaged in any way, e.g. B. Power cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been switched off.
Use only with a riser specified by the manufacturer or sold with the device. If a riser is used, use caution when moving the riser and device combination to avoid injury from tipping over.
The device is intended for use in an ambient temperature of 32° – 95°F (0° – 35°C).

INSTALLATION

This game is designed for indoor and personal use only. It must not be installed outdoors.
The following conditions must be avoided.

Direct sunlight, high humidity, direct contact with water, dust, extreme heat or extreme cold.
Vibration. The game must be installed on a flat surface.
Do not install the game in an area where the game could present an obstruction in an emergency (for example, near firefighting equipment or emergency exits).

SPECIFICATIONS

This product is only intended to be used with the supplied adapter:
Vendedor: Blue Iron Holdings Ltd.
Model:BI36-120300-U2
POWER SUPPLY:AC/DC adapter
INPUT POWER:AC 100-240 V~50/60 Hz 1.2 A max.
OUTPUT POWER:DC12V - 3A
MONITOR:17 inch LCD
ASSEMBLED DIMENSIONS:116,33 x 48,26 x 57,80 cm (45,8 x 19 x 22,75 Zoll)

The AC/DC adapter serves as a disconnect device.
The device's AC/DC adapter must not be blocked OR easily accessible during intended use.
To completely cut off the electrical supply, the device's AC/DC adapter must be disconnected from the mains.

SUPPORT OR SERVICE

Before contacting us for support or service, please read the Troubleshooting section of the User Guide.
If you still have questions about your Arcade1Up product or need technical support, contact Arcade1Up Customer Service at www.Arcade1Up.com and click Contact Us.

GAME CONTROL

*ARCADE MAY TAKE 10-15 SECONDS TO TURN ON

AFTER TURNING ON, MOVE THE LEFT JOYSTICK TO SCROLL THROUGH THE PLAYLIST
PRESS BUTTON A TO SELECT GAME
FOLLOW THE GAME CONTROLS BELOW FOR EACH GAME
HOLD PLAYER 1 (5 SECONDS) TO GO BACK TO MENU

WARNING

TO ENJOY A SAFE GAME ENVIRONMENT
Please use the wall anchor set included with the product.

WARNING
Death or serious crush injury can result when furniture topples over.
To avoid overturning:

Set up Arcade1UP on a level floor.
Never allow children to climb or hang from the products.
Always install an anti-tilt device!

The use of anti-tip devices can only reduce the risk of overturning, not eliminate it.

WARNING:Arcade1UP assumes no responsibility for improper installation or excessive stress on screws or brackets.
This wall anchor is not a substitute for proper adult supervision.
Make sure you place your Arcade1UP on a level surface.

PROBLEMS SOLUTION

PROBLEM	POSSIBLE CAUSE	SOLUTION
The game doesn't turn on.	-The power cord is not connected to an outlet. -Cables/connectors connected incorrectly. -The ON/OFF switch is in the OFF position. -The upload button on the back of the monitor is in the OFF position.	-Make sure the power cord is plugged in and the outlet has power. (Plug other electrical devices into the outlet to ensure it works normally.) -Ensure that all cables/connectors are connected correctly and fully seated as specified in the assembly instructions. -Slide the ON/OFF switch on the control platform to the ON position. - Slide the upload switch on the back of the monitor to the ON position.
The game turns on, but there is no sound.	-Cables/connectors were connected incorrectly. -The volume control is in the OFF position.	-Ensure that all cables/connectors are connected correctly and fully seated as specified in the assembly instructions. -The volume slider is located on the right side of the control deck. NOTE: Slide the volume slider to the right to increase the volume and to the left to decrease the volume.
You hear sound but no picture.	-Cables/connectors were connected incorrectly.	-Make sure all cables/connectors are connected correctly and Form used as described in the assembly instructions.
The game screen is frozen.	-The game has a problem processing the Data.	-Turn the ON/OFF switch off and on again. -You may need to restart the game. Place the ON/OFF switch in the OFF position. Disconnect the game and wait 60 seconds to restart the game. Plug the game back in and turn the ON/OFF switch back on.
Tent / Illuminated Deck Shelter / Illuminated front panel does not light up.	-Power cord for canopy/deck guard/illuminated front panel is not plugged into the back of the monitor. -The power cord for the canopy/deck guard/illuminated front panel is plugged into the wrong input.	-Ensure that all cables/connectors are connected correctly and fully seated as specified in the assembly instructions.
Game screen looks pixelated or is there Lines running through the image.	-Cables/connectors were connected incorrectly.	-Ensure that all cables/connectors are connected correctly and fully seated as specified in the assembly instructions. -You may need to restart the game. Place the ON/OFF switch in the OFF position. Disconnect the game and wait 60 seconds to restart the game. Plug the game back in and turn the ON/OFF switch back on.
One of the buttons on the control deck is stuck in the down position.	-Debris may have got between the button and the button case.	- Take something thin (like a business card), place it between your key and key ring, and slide it back and forth to loosen dirt.
You cannot scroll through games in the game selection menu.	-You may be using the wrong joystick or pressing it Wrong keys to scroll through games.	-Consult the game controls section of the manual to ensure you are using the correct joystick or pressing the correct buttons to move through the game selection menu.
You can browse games the game selection menu, but you cannot Join a game to start playing.	-You may be pressing the wrong key to enter this Spiel.	- Check the game controls section of the user guide to make sure you are pressing the correct button to enter the game.
You entered the game, but you cannot let the game begin.	- You might be pressing the wrong key to start this Spiel.	- Check the game controls section of the user guide to make sure you are pressing the correct button to start the game.
You entered the game, but you cannot Exit the game to return to the game picker Menu.	- You may be pressing the wrong key to exit this Spiel. - You might not be holding the exit button too long or enough.	- Check the game controls section in the user manual to make sure you press the correct button to exit the game. - Make sure you press and hold the exit button for 5 seconds to exit the game.
The printed control functions Control deck doesn't match gameplay the screen of the game you are currently playing.	- You may be pressing the wrong gamepad buttons for the game you are playing.	- Check the game controls section of the user manual to ensure you are pressing the correct control buttons for this game. - Watch the game controls loading screen on your monitor to make sure you are pressing the correct controller buttons. (A WARNING:Game controls printed on the control deck apply to the resource cabinet game only. The other games in the closet use the same buttons but respond differently.)
The game won't let me choose 2 or 3 Players for a selected game.	-The game can only be a game for 1 or 2 players.	- See game controls section in user manual to see how many players can play this game.

COLLECT THEM ALL

Colors, style and decor may vary.


GOLDENES TEE CLASSIC™ GOLDENES TEE 2K™ GOLDEN TEA '99™ GOLDEN TEA '98™	MORTAL KOMBAT™ MORTAL KOMBAT 2™ ULTIMATE MORTAL KOMBAT 3™	FINAL FIGHT™ 1944 O LOOP-MASTER™ GHOSTS AND GOBLINS™ STRIDER®	FROGGER TIME PILOT TIME PILOT 84

Visitarcade1up.com
SUBSCRIBE TO OUR MAILING LIST AND SEE THE FULL LIST OF GAMES

© 2020 MARVEL © MOTO KIKAKU © CAPCOM CO., LTD 2020
© CAPCOM. LICENSED FOR USE BY TASTEMAKERS, LLC.
MADE IN CHINA
Stand 08.31.20

Documents/Resources

	ARCADE1UP 82058280 X-Men vs. Street Fighter[pdf] Instruction Manual 82058280, 2APXH82058280, 82058280 X-Men vs. Street Fighter, 82058280, X-Men vs. Street Fighter
	ARCADE1UP 82058280 X-Men vs. Street Fighter[pdf] Instruction Manual 82058280 X-Men vs Street Fighter, 82058280, X-Men vs Street Fighter
	ARCADE1UP 82058280 X-Men vs. Street Fighter[pdf] Instruction Manual 82058280 X-Men vs Street Fighter, 82058280, X-Men vs Street Fighter
	ARCADE1UP 82058280 X-Men vs. Street Fighter[pdf] Instruction Manual 82058280 X-Men vs Street Fighter, 82058280, X-Men vs Street Fighter

references

ARCADE1UP SFBB Street Fighter II Big Blue Instruction Manual
ARCADE1UP SFBB Street Fighter II Big Blue CAUTION To ensure safe operation of the product, be sure to…
Capture VS Apps User Guide
Capture VS Apps Summary This guide shows how to enable push notifications from Capture VS App. Requirements…
Schreder GEN2 Penetation Fixation Street Light Instruction Manual
GEN2 Penetrating Accessory INSTALLATION INSTRUCTIONS www.schreder.com
Cosori Premium CP428-VS Vacuum Sealer Manual
Cosori Premium Vacuum Sealer CP428-VS User Manual - Download [otimizado]Cosori Premium Vacuum Sealer CP428-VS User Manual - Download

ARCADE1UP 82058280 X-Men vs. Street Fighter Instruction Manual - Manuals+ (2023)